60cm*60cm Ceiling Panel Making Machine
Brief Introduction
This ceiling panel making machine mainly produces the decoration ceiling tiles and it adopts automatic material input, first flattening, punching holes, servo feeding, cutting to length, conveyor, second flatting, corner cutting, tile turn mechanical and forming. Additionally, the production line is featuring with full automatic, high precision, fast production speed and few operation workers. Based on automatic stamping, high production efficiency and technological requirements:

Features & Specifications
| parameter | specifications |
| Suitable material | GI/Aluminum |
| Final dimension | 600mm*600mm |
| Material thickness | 0.3-2.2mm |
| Line speed | 3-5 pcs/min |
Production Line Configuration
Material Uncoiler: 1 set
It adopt hydraulic feeding frame and the capacity is 5 Ton with manual feeding function.
Leveling Machine: 1 set
This part flattens the coil material to make the surface flat so the punch can be more accurate. The motor is 3kw and drive through cycloidal pin gear speed reducer motor which featured with fast response and high precision.
High speed Gantry Punch: 1 Set 120T ( with pneumatic clutch and frequency control)
We use 120Ton high speed Gantry Punch to punch the hole. Punch four / eight rows of holes each time. The die used SKD11 material and the punching hole is 2.5mm and punch speed is 100-150 strokes per minutes.
Pneumatic Punch/Corner Notching : 1 Set
This is four column oil press structure and the capacity is 40 Ton with the dies to finish the 4 corners punch to ensure the accurate of the punching.
Flip device and Feeding device of sucker: 1 Set
This mechine is used for turn the material after corner punched, to put the spur surface inside to make sure the final product high performance. This machine adopt the gas cylinder to hold the material to lift to certain height then turn 1800, then low the material to the conveyer position.
This machine mainly feeds the punched material to the corner punching machine. It also uses the rubber sucker and drive by the worm gear reducer motor. The position device is under the mechanic hand.
Four-column hydraulic press (automatic forming and automatic output.)
It is 120Ton four column oil press structure with die to form the semi finished product. The work piece will be pushed out with oil cylinder or spring power. And equipped with guide column to ensure the accuracy.
Output conveyor
This conveyor used to deliver the tiles out. This conveyor use worm and gear reduce motor as the driving power and transport through belt converyor and the tiles and the conveyor is relative standstill and it won’t scratch the surface.
Electrical System
The ceiling panel making machine is automatic, control system adopts Delta servo motor, Panasonic PLC and Delta 10 inch’ HMI, menu in system is equipped with production specification, process speed. And quantity also have parameters, and users also can input other procedures based on production needs to reach different requirements of products.
Technical Process of the Ceiling Panel Making Machine
Material Uncoiler→Rough Leveling→120 Ton High Speed Punching →NC Puller/Servo feeder→Corner Notching→Conveyor→Precise Leveling→Conveyor →Flip Device→Feeding Device of Sucker→120 Ton Hyd. Press Forming→Output Coneyor→ Finished Products
Why Choose our Roll Forming Machine
- Warranty period: The warranty period for machine frame, rolling dies, electrical components, etc. — 1 year.
- After-sale service:During the warranty period, if the spare parts of the equipment are damaged during normal operation, supplier will provide free replacement parts.
- Ultra-precise forming: Ensures consistent dimensions with a tolerance of no more than 0.5mm, enabling seamless assembly in projects.
- Customizable efficiency: Tailored to customers’ production needs to build the most efficient roll forming machine for specific workflows.
Customers’ Cases




















