Scaffold Walk Board Roll Forming Machine
The walking board roll forming machine is non-standard and customizable. It can fabricate various types of walking board and scaffold deck accordance with customers’ drawing specifications to fit diverse application scenarios. Accordingly, the performance of its hydraulic punching unit, main forming machine and hydraulic cutting can all be custom-engineered to meet specific production requirements.
PECIFICATION:
- Suitable material HCR Coil / Carbon Steel Coil, GI Coil
- Material Thickness 0.8~2.5mm
- Profile 90/100/120*70mm
- Complete line working speed 2~5m/min
Production Flow
Steel Coil –> Straightening Machine –> Punching Machine –> Roll Forming Machine –> Hydraulic Cut Off –> Run Out Table –> Finished Scaffold Walk Board Product –> PLC Control

Main Components of Roll Forming Machine
Decoiler-Roll Former
- With prevent frame
- Coils outer diameters 1600mm
- Coils inner diameters 460-520mm
- Coil width 500mm
- Coil weight 3000kgs
- Manual way to tighten the coils
- With manual brake device

Leveler
- Feeding material width 400mm
- Feeding material thickness 0 mm
- Rollers quantity 11pcs
- Roller material GCr 15steel
- Heat treatment hardness HRC55°-57°
- Motor power 3 KW
- Transmitt by chain and gear

Material Feeder
- Feeder material width 400mm
- Feeder material thickness 2.5mm
- Rollers quantity 4pcs
- Roller material GCr15steel
- Roller heat treatment hardness HRC55-57
- Servo motor power 1.8KW
- Transmitt by gear
Power Press
- Working pressure 80Ton (air clutch )
- Working times 60times/min
- Punching moulds 3 sets (90mm, 100mm, 120mm)

Main Roll Forming Machine
- Adjusting the width by spacer.
- Material thickness 1.8-2.5mm
- Rollersstation 24 groups
- Straightening roller 5 pcs
- Roller material GCr15
- Roller heat treatment HRC55-57°
- Roller’s surface finishing poilish treatment
- Roller main shaft diameter 60mm , material : 45# steel
- Roller’s axis 60310
- Pinch wall thickness 30mm
- Transmitt way gear and chain
- Motor and speed reducer 5 kw x 3sets
- Equip with water cooling system

Hydraulic Cut-off
- Hydraulic station motor 4 kw
- Cut off mould 4sets
- Cutting mold material SKD11
- Treatment hardness HRC60°-62°
- The machine stop , then cut

Run out Table
- Length 6 meters
- weld byangle steel
- Pneumetic discharge
Control System
- Control system PLC, Touchable Screen (good quality brand)
- Electric parts ain electric parts adopt to good quality brand.
- Length setting by PLC, messuring by encoder
- Speeding adjusting by Transducer.
- The machine stop , then cut
- Power : Customized
Finished Produt















